Products

 Home / Products

SCANNER


The microprocessor based temperature scanner SUNSACN is available in different models, suitable for RTD,T/C,ma and mv types of input. The Scanner scans all input channels continuously and compares it with alarm and trip settings and generates outputs. The Scanner has two levels of operation.
Operator level permits channel display selection, Auto/Hold mode, alarm acknowledge and dwell time adjustment. The supervisory level is permitted through password control to adjust Alarm & Trip settings, group configuration, output response adjustment, addition/deletion of channels and many more.

 

FEATURES
Microprocessor based design.
Site programmable.
Dynamic color change for trip and non trip.
Annunciators are also provided with Universal Power Supply ranging from 90 – 270V AC/DC. The Power Supply offers very high noise immunity.
Our Annunciators are tested at ETDC and SAMEER – Chennai for various type tests as per IS 9000 and IEC 255-4.

 

ADVANTAGES
RS 485 communication port available. MODBUS Slave RTU protocol supported.
Window wise NO / NC selection.
Dispensation of DIP switches and can be programmed through Test/Accept/Reset push buttons provided in the panel.
Insertion of legends/changing the existing legends possible from the front, without disturbing the unit.

FLOW INDICATOR AND INTERGRATOR


The FIQ-2002 Flow indicator and Intergrator accepts 4-20mA/0-10V input signal and displays the Engineering unit and also cumulates the value. The process value is displayed on a 6 digit LED display. The FIQ-2002 employs SMD technology to optimize space and increase reliability. Housed in a sleek enclosure FIQ-2002 can be remotely accessed.

 

FEATURES
Microprocessor based design.
4-20 mA/0-10V DC input.
Direct Reading in Engineering units.
Optional backlit-LCD display for parameter display.
Optional RS-485 MODBUS Communication.
Power supply for transmitter built-in.
Universal input power supply 90 to 270V AC/DC.
Retransmission output (4-20 mA/0-10V)
Two auxiliary relay output
PSTN Connectivity

PROCESS INDICATOR


The IND-2002 Process indicator , based on microcontroller, gives flexibility to monitor the process parameters without affecting the process. The IND-2002 employs SMD technology to optimize space and increase reliability. Housed in a sleek enclosure IND-2002 can be remotely accessed through RS-485 MODBUS protocol.

 

FEATURES
Microcontroller based design.
Optionally Universal type accepting.
4-20 mA/0-10V DC input.
R,S,J,K,T&E types of Thermocouple.
PT100.
Direct Reading in Engineering units.
Optional backlit-LCD display for parameter display.
Optionally Universal type accepting.
Retransmission output ( 4-20 mA/0-10V).
Two auxiliary relay output.
PSTN connectivity.
Copyright © 2020 SIASPL | All rights reserved. Designed By